SPECIFICATIONS
QuartZ-Configuration
| Phased Array Channels | 32:128 PR |
| PA Firing Modes | Up to 32 consecutive elements. Up to two apertures of 16 consecutive elements |
| Phased Array Connector | 2 x ZPAC connector (custom ZIF with latch). Allows connecting 2 probes without splitter. Automatic probe recognitions (with Zetec probes). |
| UT Channels | 2 channels (in Pulse/Echo or Pitch/Catch configurations |
Pulser
| Pulse width | 25 ns to 500 ns |
| Pulse amplitude PA (at 50Ω) | 35 V to 100 V |
| Pulse amplitude UT (at 50Ω) | 50 V to 200 V |
Data Acquisition
| A-scan length | Up to 16,384 points |
| Maximum number of focal laws | 1024 |
| Real-time averaging | 1, 2, 4, 8, and 16 |
| Compression | 1, 2, 4, 8, and 16 |
| PRF | Up to 20 kHz |
| Parallel Firing | 2 beams |
| Maximum number of samples | 16384 |
| Measurement Gates | 4 gates + 1 synchronization gate |
| Data throughput | Up to 30 MB/s |
| Maximum data file | 20 GB |
| Digitizing frequency | 25 MHz, 50 MHz or 100 MHz |
| Bandwidth (at -3 dB) | 500 kHz to 18 MHz |
| Summed data amplitude resolution | 16 bits |
| Filters | Analog / Digital band-pass, high-pass and low-pass |
| Gain setting range PA | 70 dB (analog) + 30 dB (digital) |
| Gain setting range UT | 70 dB (analog) + 24 dB (digital) |
Interfacing
| Data Interfaces | Ethernet 1000 Base-T |
| Encoder | 2 axes (quadrature, clock direction) |
Housing
| Size (H × W × D) | 420x490x90mm (16.5 x 19.3 x 3.5 in) |
| Weight | 8.34 Kg |
| Air Intake | No |
General specifications
| Voltage | 120 VAC or 240 VAC |
| Frequency | 50 Hz or 60 Hz |
| Maximum power | 75 VA |